Archive for the ‘UPS’ tag
Clean That Dirty Facility Power
Companies constantly are looking for soltuions to meet their power needs as power in the world can be very limited at times. No matter how much power is coming into the facility, the power is often dirty and needs cleaning as it comes from the power grid.
Facility power is very dirty. This means the power fluctuates and surges daily, and sometimes hourly in some places. This might not seem like it matters, but when power fluctuates or surges, it can cause huge problems for businesses who run very sensative electronic equipment. Household items like light bulbs, fridges, and stoves are not usually affected because they are made to withstand a high tolerance of power fluctuation.
Expensive equipment is very different than your regular house hold electrical users like a fridge or light bulb. Large companies run very sensitive and complex simulators to train employees, pilots, and soldiers for combat situations. Some of these simulators cost in the billion range and are very sensitive to power fluctuations or surges.
When power fluctuates and surges, it can cost these types of companies a lot of money. What is the solution to this power cleaning issue? The answer is custom UPS and battery backup sytems. These systems take the incoming facility power and isolate and clean the power so that the power that reaches the equipment is clean and perfect. This helps the electronic equipment last longer and reduced the likelihood of failure or shutdown of certain components within the electronic equipment.
Along with UPS systems, custom battery backup systems can be built to provide battery backup to critical systems. Backup times can range from minutes to hours depending on the power needs of the company and the type of equipment they are running. With the use of a UPS and battery backup system, the ability to have clean perfect power can be attainable to help keep sensitive electronic equipment safe and running smoothly.
Mike writes about kva ups sytems and about 60 kva ups
Mail this postPopularity: 6% [?]
How to keep your uninterruptible power supply uninterruptible
Providing protection to your home computer, workstation or network is always a good idea; the devices and batteries however do need some degree of looking after in order to do this. Batteries need to be replaced from time to time and devices need to be tested. Here are a few simple tips to keep your uninterruptible power supply uninterrupted.
So you have got your workstations or your network plugged into an uninterruptible power supply. Well, you have made the right decision. Maintaining your uninterruptible power supplies is important; worrying about losing hours of progress thanks to a blown fuse will not be neccessary if you undertake some work to ensure everything is working correctly.
In your workstation, for example say you use RBC batteries. An even better idea than that one is to replace the battery before it gets too old.
RBC7 batteries last a remarkably long time, but they do eventually fade. Since most RBC battery suppliers offer a one year warranty, when this runs out it might be a good idea to replace it. If you look at it as an investment, rather than an annual bill that has stacked up on top of the normal bills, then you will realise that it makes perfect sense. Leaving your computer unprotected in the event of an outage or risk your battery burning out isn’t an option so why not spend a few extra pounds a year replacing your RBC batteries.
Maintaining any sort of communications network, be it an office network or a wireless internet hot spot is another example. Obviously, you want to keep your IT equipment functioning, or else you risk losing work or even clients, so to eliminate this you get an uninterrupted power supply system to keep your network going should there be a power surge
Great, but try to make sure you are relying on a reliable product to provide you with that security. Paying a few extra pounds to ensure reliabilty and warranty to your product is something that Reillo UPS provide; other no-name brand companies might not offer this and you may find yourself with a costly bill should your system break down.
Common sense when maintaining any electronic device is what it really comes down too. Testing your devices to ensure that the UPS will provide standby power when the lights go out is essential; it would therefore be a good idea to set up an old laptop beforehand to run some tests. When it starts getting old, then replace it. When you need it to work, you want you need to make sure it works.
Mail this postPopularity: 1% [?]